Running gear self-diagnosis for ABS

Chapter overview

• Self-diagnosis, Electrical check
  1
• 1 Self-diagnosis function ITT Mark 20 GI and ITT Mark 20 IE
  1
• 1.1 Self-diagnosis function ITT Mark 20 GI and ITT Mark 20 IE
  1
• 1.2 Function
  1
• 1.4 Technical data of self-diagnosis
  3
• 1.5 Safety precautions and fundamental points regarding fault finding
  3
• 2 Electrical/electronic components and fitting locations >09.99
  6
• 2.1 Electrical/electronic components and fitting locations >09.99
  6
• 3 Faults displayed by warning lamps K47 and K7 > 09.99
  12
• 3.1 Faults displayed by warning lamps K47 and K7 > 09.99
  12
• 4 Performing self diagnosis > 09.99
  13
• 4.1 Performing self diagnosis > 09.99
  13
• 4.2 Test prerequisites for self-diagnosis
  13
• 4.3 Safety precautions
  13
• 4.5 Connecting fault reader V.A.G 1551 and selecting functions
  14
• 4.6 List of selectable functions
  17
• 4.7 Interrogating fault memory
  17
• 4.8 Automatic test sequence
  18
• 4.9 Fault table
  19
• 4.10 Erasing fault memory, ending output
  24
• 4.11 Coding control unit
  25
• 4.12 Read measured value block
  26
• 4.13 Final control diagnosis
  29
• 4.14 Initiating basic setting
  36
• 5 Electrical check of ABS, ABS/EDL ITT Mark 20 GI and ITT Mark 20 IE
  41
• 5.1 Electrical check of ABS, ABS/EDL ITT Mark 20 GI and ITT Mark 20 IE
  41
• 5.2 Test prerequisites
  42
• 5.4 Test table - ABS, ABS/EDL ITT Mark 20 GI (to 07.97)
  44
• 5.5 Multi-pin connector with contact assignment - ABS, ABS/EDL ITT Mark 20 IE (from 08.97)
  49
• 5.6 Test table - ABS, ABS/EDL ITT Mark 20 IE (from 08.97)
  50
• 5.7 Adjusting brake light switch
  55
• 6 Mark 30 IE self-diagnosis function
  56
• 6.1 Mark 30 IE self-diagnosis function
  56
• 6.2 Function
  56
• 6.3 ABS Mark 30 IE allocation
  56
• 6.4 Technical data of self-diagnosis
  57
• 6.5 Safety precautions and fundamental points regarding fault finding
  57
• 7 Electrical/electronic components and fitting locations, Caddy 10.99 >
  60
• 7.1 Electrical/electronic components and fitting locations, Caddy 10.99 >
  60
• 8 Faults displayed by warning lamps K47 and K118, 10.99 >
  70
• 8.1 Faults displayed by warning lamps K47 and K118, 10.99 >
  70
• 9 Performing self diagnosis 10.99 >
  71
• 9.1 Performing self diagnosis 10.99 >
  71
• 9.2 Test prerequisites for self-diagnosis
  71
• 9.3 Safety precautions
  71
• 9.5 Connecting fault reader V.A.G 1551 and selecting function
  73
• 9.6 List of selectable functions
  75
• 9.7 Interrogating fault memory
  75
• 9.8 Fault table
  76
• 9.9 Erasing fault memory, ending output
  82
• 9.10 Coding control unit
  83
• 9.11 Read measured value block
  84
• 9.12 Final control diagnosis
  88
• 9.13 Initiating basic setting
  88
• 10 Electrical check of ABS Mark 30 IE
  89
• 10.1 Electrical check of ABS Mark 30 IE
  89
• 10.2 Test prerequisites
  90
• 10.3 Multi-pin connector with contact assignment
  91
• 10.4 Test table
  93
• 10.5 Adjusting brake light switch
  100
• 11 Definitions
  101
• 11.1 Definitions
  101