Propshaft and rear final drive

Chapter overview

• Technical data
  1
• 1 Technical data
  1
• 1.1 Assembly allocation and capacities
  1
• 1.2 Gear ratio
  1
• 2 General repair instructions
  2
• 2.1 Oil
  2
• 2.2 Axle beam
  2
• 2.3 Gaskets and seals
  2
• 2.4 Nuts and bolts
  2
• 3 Genuine parts
  4
• Final drive - differential
  5
• 1 Connecting vehicle diagnostic tester and selecting function
  5
• 2 Propshaft
  6
• 2.1 Assembly overview - propshaft
  6
• 2.2 Removing and installing propshaft
  7
• 2.3 Renewing bellows for rear propshaft
  11
• 3.1 Removing
  16
• 3.2 Installing
  17
• 4 All-wheel drive coupling
  19
• 4.1 Checking function of all-wheel drive coupling
  19
• 4.2 Electrical/electronic components and fitting locations
  19
• 4.3 Assembly overview - all-wheel drive control unit J492
  20
• 4.4 Removing and installing four-wheel drive control unit J492
  21
• 4.5 Removing and installing all-wheel drive coupling pump V181
  24
• 4.6 Assembly overview - all-wheel drive coupling
  27
• 4.7 Removing and installing all-wheel drive coupling
  28
• 4.8 Assembly overview - dismantling and assembling all-wheel drive coupling
  31
• 5 Rear final drive
  33
• 5.1 Assembly overview - rear final drive
  33
• 6 Replacing oil seals for rear axle shafts
  35
• 7 Checking oil level in rear final drive or adding oil
  40
• 8 Checking or replenishing oil level of all-wheel drive coupling
  41
• 8.1 Checking oil level in all-wheel drive coupling
  41
• 8.2 Replenishing oil in all-wheel drive coupling
  42