Heating, air conditioner

Kapitelübersicht

• Technical data
  1
• 1 Safety information
  1
• 1.1 Safety precautions when working on air conditioning systems
  1
• 1.2 Safety precautions when handling refrigerants
  2
• 1.3 Safety measures when working on vehicles with start/stop system
  2
• 1.4 Safety precautions when working on high-voltage system
  2
• 1.5 Safety precautions when working in the vicinity of high-voltage components
  3
• 1.6 Safety precautions when working on the cooling system
  3
• 1.7 Safety precautions for working on vehicles with auxiliary/supplementary heater
  4
• 2 Identification
  6
• 2.1 Identification of heater and air conditioning unit
  6
• 3 General information
  8
• 3.1 Notes for vehicles with start-stop system
  8
• 3.2 Type plates
  8
• 4 Repair instructions
  12
• 4.1 Working on refrigerant circuit
  12
• 4.2 General repair instructions
  13
• 4.3 Refrigerant circuit seals
  13
• 5 Technical data
  14
• 5.1 Refrigerant capacity
  14
• 5.2 Refrigerant oil capacities
  14
• 5.3 Oil distribution
  15
• Heating
  16
• 1 Heating
  16
• Air conditioning system
  17
• 1 Overview of fitting locations - air conditioning system
  17
• 1.1 Overview of fitting locations - components not located in passenger compartment
  17
• 2 Refrigerant circuit
  24
• 2.1 System overview - refrigerant circuit
  24
• 2.2 Assembly overview - refrigerant lines
  31
• 2.3 Assembly overview – condenser
  35
• 2.4 Assembly overview - heat exchanger for high-voltage battery
  37
• 2.5 Removing and installing refrigerant circuit pressure sender G805
  38
• 2.6 Removing and installing expansion valve
  39
• 2.7 Removing and installing condenser
  47
• 2.8 Removing and installing desiccant bag or cartridge
  50
• 2.9 Removing and installing damper weight for refrigerant line, low-pressure side
  61
• 2.10 Removing and installing refrigerant pressure and temperature sender G395
  61
• 2.13 Removing and installing heat exchanger for high-voltage battery
  70
• 2.15 Removing and installing refrigerant line with internal heat exchanger
  76
• 2.16 Refrigerant line with restrictor
  83
• 2.23 Commissioning air conditioning system after filling refrigerant circuit
  99
• 3 Air conditioner compressor
  101
• 3.1 Assembly overview – drive unit of air conditioner compressor
  101
• 3.2 Assembly overview - pulley
  108
• 3.3 Removing air conditioning compressor from and installing on bracket
  114
• 3.4 Removing and installing air conditioner compressor
  118
• 3.5 Removing and installing high-voltage system fuse 3 S353
  125
• 3.6 Checking high-pressure safety valve on air conditioner compressor
  125
• 3.7 Removing and installing pulley
  126
• 4 Control motors
  135
• 4.1 Overview of fitting locations – control motors at front
  135
• 4.4 Removing and installing air recirculation flap control motor V113
  148
• 4.7 Removing and installing rear temperature flap control motor V137
  160
• 4.11 Removing and installing air distribution flap actuator
  175
• 5 Front heater and air conditioning unit
  182
• 5.1 Assembly overview – heater and air conditioning unit
  182
• 5.3 Assembly overview – evaporator housing
  189
• 5.4 Assembly overview - flaps and partitions in air distribution housing
  190
• 5.5 Removing and installing heater and air conditioning unit
  193
• 5.6 Dismantling and assembling heater and air conditioning unit
  198
• 5.7 Removing and installing air distribution housing
  199
• 5.8 Removing and installing holder for heater and air conditioning unit
  200
• 5.9 Removing and installing evaporator
  202
• 5.10 Removing and installing fresh air blower control unit J126
  204
• 5.11 Removing and installing dust and pollen filter
  205
• 5.12 Removing and installing fresh air blower V2
  209
• 5.15 Removing and installing heat exchanger
  217
• 5.16 Removing and installing coolant pipes on heat exchanger
  237
• 5.17 Removing and installing evaporator temperature sensor G308
  241
• 5.18 Checking condensation drain
  243
• 5.19 Removing and installing condensation drain
  245
• 5.20 Removing and installing baffle plate
  249
• 6 Air duct
  250
• 6.1 Assembly overview – air duct and air distribution in passenger compartment
  250
• 6.2 Removing and installing fresh air intake
  251
• 6.3 Removing and installing cover for fresh air intake
  254
• 6.4 Removing and installing air intake duct
  254
• 6.5 Removing and installing driver side footwell vents
  255
• 6.6 Removing and installing front passenger side footwell vents
  257
• 6.7 Removing and installing rear footwell vent
  259
• 6.8 Removing and installing air duct for rear vent
  260
• 6.9 Removing and installing dash panel air duct
  261
• 6.10 Removing and installing air duct for rear centre console vent
  262
• 6.11 Checking forced ventilation for passenger compartment
  263
• 6.12 Removing and installing forced ventilation for passenger compartment
  264
• 6.13 Removing and installing air duct for defroster vent
  265
• 6.14 Removing and installing air duct for centre vent
  265
• 7 Coolant circuit
  267
• 7.1 Assembly overview - high-voltage heater (PTC) ZX17
  267
• 7.2 Incorporation of high-voltage heater (PTC) Z115 into coolant circuit
  269
• 7.4 Removing and installing coolant valve for high-voltage battery N688
  275
• 7.5 Removing and installing coolant valve for high-voltage battery V590
  276
• 8 Operating and display unit
  284
• 8.1 Overview of operating and display unit
  284
• 8.2 Removing and installing operating and display unit
  291
• 9 Other controlling and regulating components
  295
• 9.1 Removing and installing sunlight penetration photosensor G107
  295
• 9.2 Removing and installing external air quality and humidity sensor G935
  296
• 9.3 Removing and installing ambient temperature sensor G17
  298
• 9.4 Removing and installing humidity sender for air conditioning system G260
  298
• 9.5 Removing and installing left vent temperature sender G150
  298
• 9.6 Removing and installing right vent temperature sender G151
  300
• 9.7 Removing and installing rear vent temperature sender G174
  301
• 9.8 Removing and installing footwell vent temperature sender G192
  302