General body repairs, interior

Kapitelübersicht

• Technical data
  1
• 1 Safety information
  1
• 1.1 Safety measures when working on vehicles with a start-stop system
  2
• 1.2 Safety measures when working with pyrotechnic components
  3
• 1.4 Additional safety regulations for side airbag
  5
• 1.5 Additional safety instructions for curtain airbag
  5
• 1.6 Safety regulations for crash sensors (pressure sensors) for front side airbags
  6
• 1.8 Checking airbag securing parts after an accident
  8
• 1.9 Accident without airbag triggering
  9
• 1.10 Checking seat belts
  9
• 1.11 Check belt webbing
  9
• 1.12 Checking inertia reel (locking mechanism)
  10
• 1.13 Visually inspect belt buckle
  11
• 1.14 Check operation of belt buckle
  11
• 1.15 Check belt guide fittings and latch plates
  11
• 1.16 Checking securing parts and anchorage points after an accident
  12
• 1.18 Checking child seat anchors after an accident
  12
• 1.19 Safety instructions for automatically dimmable interior mirror
  13
• 2 Repair instructions
  14
• 2.1 Contact corrosion
  14
• 2.2 Routing and securing wires
  14
• Interior equipment
  15
• 1 Compartments/covers
  15
• 1.1 Removing and installing dash panel cover on driver side
  15
• 1.2 Removing and installing dash panel cover on front passenger side
  18
• 1.3 Removing and installing upper steering column trim
  21
• 1.4 Removing and installing lower steering column trim
  23
• 1.5 Removing and installing glove compartment
  25
• 1.6 Removing and installing glove compartment opener
  27
• 1.7 Removing and installing headliner storage compartment
  28
• 1.8 Removing and installing driver side footwell cover
  28
• 2 Equipment
  30
• 2.1 Removing and installing sun visor
  30
• 2.2 Removing and installing roof grab handle
  31
• 3 Centre console
  33
• 3.1 Removing and installing cover for centre console
  33
• 3.2 Removing and installing centre console
  34
• 3.3 Removing and installing trim for operating and display unit
  45
• 4 Front centre armrest
  48
• 4.1 Removing and installing front centre armrest
  48
• 5 Interior mirror
  50
• 5.1 Removing and installing interior mirror
  50
• 5.2 Removing and installing retaining plate
  52
• Passenger protection
  57
• 1 Seat belts
  57
• 1.1 Assembly overview - front three-point seat belt
  57
• 1.2 Removing and installing front 3-point seat belt
  58
• 1.3 Removing and installing rear three-point seat belt
  59
• 1.4 Removing and installing front belt buckle
  61
• 1.5 Removing and installing rear belt buckle
  62
• 2 Airbag control unit
  65
• 2.1 Removing and installing airbag control unit J234
  65
• 3 Driver's airbag
  68
• 3.1 Removing and installing airbag unit with igniter
  68
• 4 Front passenger side airbag
  72
• 4.1 Removing and installing front passenger side airbag unit with igniter
  72
• 5 Side airbags
  77
• 5.1 Removing and installing front side airbag with igniter
  77
• 6 Curtain airbags
  79
• 6.1 Removing and installing curtain airbag with igniter
  79
• 7 Crash sensors
  82
• 7.1 Removing and installing front side airbag crash sensor G179 / G180
  82
• 7.2 Removing and installing rear side airbag crash sensor G256 / G257
  84
• 8 Seat occupied recognition
  86
• 8.1 Removing and installing seat occupied recognition
  86
• Trim, insulation
  89
• 1 Front door trims
  89
• 1.1 Removing and installing door trim at front
  89
• 1.2 Removing and installing mirror cover trim
  94
• 2 Dash panel
  95
• 2.1 Removing and installing dash panel end cover
  95
• 2.2 Removing and installing dash panel decorative trim
  96
• 2.3 Removing and installing dash panel
  97
• 2.4 Removing and installing additional instrument trim
  102
• 2.5 Removing and installing dash panel vents
  105
• 3 Dash panel central tube
  108
• 3.1 Assembly overview - dash panel central tube
  108
• 3.2 Removing and installing dash panel central tube
  108
• 4 Interior trims
  113
• 4.1 Removing and installing A-pillar trim
  113
• 4.2 Removing and installing B-pillar trim
  117
• 4.3 Removing and installing C-pillar trim
  119
• 4.4 Removing and installing sill panel mouldings
  121
• 4.5 Removing and installing side trim panel
  123
• 5 Luggage compartment trims
  125
• 5.1 Removing and installing lower rear lid trim
  125
• 5.2 Removing and installing rear lid side trim
  126
• 5.3 Removing and installing upper trim on rear lid
  128
• 5.4 Removing and installing rear shelf support
  128
• 5.5 Removing and installing luggage compartment side trim
  129
• 5.6 Removing and installing lock carrier trim
  130
• 6 Roof trims
  132
• 6.1 Removing and installing roof end strip
  132
• 6.2 Removing and installing moulded headliner
  132
• 6.3 Mounting roof reinforcement on body
  137
• Seat frames
  140
• 1 Overview of seat variants
  140
• 1.1 Mounting front seat on seat repair stand
  140
• 2 Front seats
  143
• 2.1 Overview of fitting locations - electrical and electronic components
  144
• 2.2 Removing and installing front seat
  152
• 2.3 Connecting and disconnecting airbag adapter
  156
• 2.4 Removing and installing seat height
  158
• 2.5 Removing and installing backrest adjustment mechanism
  161
• 2.6 Removing and installing front backrest
  162
• 2.7 Removing and installing head restraint guide
  166
• 2.8 Dismantling and assembling seat pan
  167
• 2.9 Removing and installing trim for backrest release mechanism
  169
• 2.10 Removing and installing backrest release mechanism
  170
• 2.11 Removing and installing driver seat lumbar support adjustment switch E176
  171
• 2.12 Removing and installing slider
  171
• 2.13 Removing and installing torsion rod
  172
• 2.14 Removing and installing interconnecting Bowden cable
  175
• 2.15 Removing and installing Bowden cable for backrest release
  177
• 2.16 Adjusting Bowden cable for backrest release mechanism
  181
• 2.17 Removing and installing mounting bracket for backrest release mechanism
  182
• 2.18 Removing and installing backrest release holder
  183
• 2.19 Checking and adjusting easy-entry Bowden cable A
  185
• 2.20 Removing and installing easy-entry Bowden cable A
  185
• 2.21 Removing and installing easy-entry Bowden cable B
  188
• 2.22 Removing and installing seat trim on sill side
  190
• 2.23 Removing and installing seat trim bracket on sill side
  194
• 2.24 Removing and installing seat trim on tunnel side
  195
• 2.25 Removing and installing backrest trim
  197
• 2.26 Removing and installing height adjustment motor
  199
• 2.27 Removing and installing rake adjustment motor
  203
• 2.28 Removing and installing longitudinal adjustment motor
  205
• 2.29 Removing and installing backrest adjustment motor
  206
• 2.31 Removing and installing heated front seats control unit J774
  211
• 2.32 Removing and installing easy-entry button
  211
• 2.33 Removing and installing switches
  212
• 2.34 Removing and installing 4-way lumbar support
  212
• 2.35 Removing and installing backrest adjustment switch unit
  214
• 2.36 Adjusting switch unit microswitch
  219
• 2.37 Checking switch unit microswitch
  222
• 2.38 Carrying out switch unit adaptation run (calibration)
  223
• 3 Rear seats
  224
• 3.1 Removing and installing bench seat / individual seats
  224
• 3.2 Removing and installing rear seat backrest
  225
• 3.3 Removing and installing locking mechanism for rear seat backrest
  228
• 3.4 Removing and installing backrest frame
  230
• Seat - padding, covers
  233
• 1 Front seat covers and padding
  233
• 1.1 Removing and installing seat cover and seat cushion for seat pan
  233
• 1.2 Removing and installing backrest cover and cushion
  237
• 1.3 Removing and installing seat heating element Z6 / Z8
  244
• 1.4 Removing and installing backrest heating element Z7 / Z9
  245
• 2 Rear seat covers and padding
  246
• 2.1 Removing and installing cover and cushion
  246