Gas drive - General information

Chapter overview

• Technical data
  1
• 1 Safety information
  1
• 1.1 Safety precautions when working on natural gas system
  1
• 2 General information
  2
• 2.1 Other reference material
  2
• 3 Induction training/staff qualifications
  3
• 3.1 Induction training/staff qualifications
  3
• 4 Receiving vehicles for repair
  5
• 4.1 Procedure for taking receipt of vehicles
  5
• 5 Statutory texts and instructions
  6
• 5.1 Rules and regulations
  6
• 5.2 Workplace requirements
  6
• 6 Fundamentals of technical and physical properties
  7
• 6.1 Physical properties
  7
• 7 Repair instructions
  8
• 7.1 Rules for cleanliness
  8
• 8 Checking gas system
  9
• 8.1 Test prerequisites for gas systems
  9
• 8.2 Checking gas system for leaks
  9
• 8.3 Searching for leaks in gas system using gas leak detector
  9
• 8.4 Searching for leaks in gas system using leak detector spray
  11
• Fuel supply system
  12
• 1 Fuel
  12
• 1.1 Handling natural gas fuel tanks
  12
• 1.2 Storing natural gas tanks
  12
• 1.3 Damage assessment catalogue for natural gas fuel tanks
  14
• 1.4 Emptying natural gas fuel tanks
  17
• 1.5 Rendering natural gas tanks insert
  29
• 1.6 Disposing of natural gas fuel tanks
  30
• 1.7 Determining residual pressure in natural gas fuel tank
  30
• 1.8 Releasing high pressure in fuel system
  43
• 2 Senders and sensors
  46
• 2.1 Gas rail temperature and pressure sensor GX21
  46
• 2.2 High-pressure valve for gas mode N372
  46
• 2.3 Gas rail sensor G401 (low-pressure side)
  47
• 2.4 Tank pressure sensor G400
  47
• Mixture preparation - injection
  48
• 1 Mixture preparation - injection
  48
• 1.1 Distinguishing between pressure sections of natural gas supply system
  48
• 1.2 High-pressure injectors N30 - N33
  51