34 PICT, Keihin carburettor and ignition system

Chapter overview

• Mixture preparation, Carburetor
  1
• 1 Air cleaner - 34 PICT carburettor
  1
• 1.1 Air cleaner - 34 PICT carburettor
  1
• 1.2 Checking automatic intake air preheating
  2
• 1.3 Checking temperature regulator
  2
• 1.4 Checking intake manifold preheating
  3
• 2 Servicing 34 PICT carburettor
  4
• 2.1 Servicing 34 PICT carburettor
  4
• 2.2 Top part of carburettor
  5
• 2.3 Bottom part of carburettor
  7
• 2.4 carburettor adjustment data
  10
• 2.5 Jets and settings
  11
• 2.6 Adjusting idling speed
  13
• 2.7 Checking and adjusting cold idling speed
  14
• 2.8 Checking function of pull-down unit
  15
• 2.9 Checking and adjusting choke valve gap
  15
• 2.10 Basic throttle valve setting
  16
• 2.11 Checking and adjusting amount injected by accelerator pump
  16
• 2.12 Cold idling valve
  19
• 2.13 Water-heated and electrically heated automatic choke
  20
• 2.14 Vacuum connections
  22
• 3 Air cleaner - Keihin carburettor
  24
• 3.1 Air cleaner - Keihin carburettor
  24
• 3.2 Checking automatic intake air preheating
  24
• 3.3 Checking intake manifold preheating
  24
• 4 Servicing Keihin carburettor>07.78
  26
• 4.1 Servicing Keihin carburettor>07.78
  26
• 4.2 carburettor adjustment data
  30
• 4.3 Jets and settings
  31
• 4.4 Adjusting idling speed
  32
• 4.5 Checking and adjusting cold idle speed
  33
• 4.6 Adjusting throttle valve gap for overrun boost
  33
• 4.7 Checking and adjusting throttle valve positioner
  34
• 4.8 Checking and adjusting quantity injected by accelerator pump
  35
• 4.9 Adjusting choke cable
  36
• 5 Servicing Keihin carburettor 08.78 >
  37
• 5.1 Servicing Keihin carburettor 08.78 >
  37
• 5.2 Top part carburettor
  39
• 5.3 Bottom part of carburettor
  41
• 5.4 carburettor adjustment data
  43
• 5.5 Jets and settings
  44
• 5.6 Adjusting idling speed
  46
• 5.7 Checking and adjusting cold idle speed
  47
• 5.8 Checking and adjusting choke valve gap
  48
• 5.9 Checking vacuum system of pull-down unit
  49
• 5.10 Checking and adjusting quantity injected by accelerator pump
  50
• 5.11 Basic setting of throttle valve stage II
  51
• 5.12 Checking vacuum limiter
  52
• 5.13 Checking stage II thermopneumatic valve
  52
• 5.14 Checking and adjusting float level
  53
• 5.15 Checking overrun boost
  53
• 5.16 Adjusting choke cable
  57
• 5.17 Vacuum connections
  58
• Ignition system
  68
• 1 Servicing breaker-triggered ignition system
  68
• 1.1 Servicing breaker-triggered ignition system
  68
• 1.2 Adjustment data, spark plugs
  72
• 1.3 Distributor data
  74
• 1.4 Installing distributor
  77
• 1.5 Checking and adjusting dwell angle and ignition timing point
  78
• 1.6 Checking ignition timing
  79
• 1.7 Vacuum unit leak test
  80
• 1.8 Checking vacuum advance control
  82
• 2 Servicing TIC-H ignition system
  84
• 2.1 Servicing TIC-H ignition system
  84
• 2.2 Safety precautions for TCI-H ignition system
  90
• 2.3 Adjustment data, spark plugs
  91
• 2.4 Distributor data
  92
• 2.5 Installing distributor
  94
• 2.6 Checking and adjusting ignition timing point
  95
• 2.7 Checking ignition timing
  96
• 2.8 Vacuum unit leak test
  98
• 2.9 Checking TCI-H ignition system
  101
• 2.10 Checking DIS switch unit
  103
• 2.11 Removing and installing rotor plate
  104
• 2.12 Checking vacuum advance control
  104
• 2.13 Adjusting engines with Digital Idling Stabilizer (DIS)
  105
• 2.14 Setting adjustments for engines with DIS/TCI 07.00 >
  106