Maintenance

Kapitelübersicht

• 1 Engine list
  1
• 2 Service work
  6
• 2.1 Service tables
  6
• 2.2 Oil change service
  7
• 2.3 Inspection service every 12 months
  11
• 2.4 Inspection service every 30,000 km
  13
• 2.5 Time or distance dependent additional work
  15
• 2.6 Delivery inspection
  17
• 3 General
  20
• 3.1 Raising vehicle with lifting platform and trolley jack
  20
• 3.2 Sticker
  21
• 3.3 Connecting fault reader
  22
• 3.4 Vehicle identification number
  24
• 3.5 Countries with elevated sulphur content in diesel fuel
  24
• 3.6 Engine code and engine number
  25
• 3.7 RME fuel (biodiesel) for vehicles 1996▸
  26
• 3.8 Type plate
  27
• 4 Descriptions of work
  28
• 4.1 Battery: Check battery terminal clamps for secure seating
  29
• 4.2 Battery: Check
  30
• 4.3 Wheel securing bolts: Tighten to correct torque setting
  30
• 4.4 Clock: Set to correct time
  31
• 4.5 Climatronic: Set temperature to 22 °C
  32
• 4.6 Radio: Activate anti-theft coding
  32
• 4.7 Engine oil level: Check, replenish if necessary
  33
• 4.8 Driver and front passenger airbags: Visual check of airbag units
  34
• 4.11 Self-diagnosis: Read fault memories of all systems
  40
• 4.12 Service interval display: Reset
  41
• 4.13 Door arrester and securing pins: Grease
  43
• 4.14 Sunroof: Check function, clean and grease guide rails
  44
• 4.15 Engine (from above and below): Perform visual check for leaks and damage
  44
• 4.16 Cooling system: Check frost protection and coolant level
  44
• 4.17 Spark plugs: Renew
  47
• 4.18 Power assisted steering: Check oil level
  48
• 4.19 Fuel filter: Renew (diesel engine)
  48
• 4.20 Fuel filter: Drain water (diesel engine)
  49
• 4.21 Dust and pollen filter: Renew filter element
  49
• 4.22 Poly V-belt: Adjust tension
  51
• 4.23 Poly V-belt: Renew
  51
• 4.25 Checking poly V-belt condition and tension poly V-belt (alternator)
  52
• 4.28 Toothed belt and toothed belt tensioning roller: Renew (SDI / TDI engines)
  56
• 4.29 Engine oil: Drain or extract and top-up; renew oil filter
  56
• 4.30 Toothed belt: Check for wear (SDI/TDI engines)
  59
• 4.31 Constant velocity joint bellows: Perform visual check
  59
• 4.33 Automatic gearbox: Check oil level of final drive
  60
• 4.34 Brake system: Perform visual check for leaks and damage
  60
• 4.35 Front and rear brake pads/linings: Check thickness
  61
• 4.36 Underbody protection: Perform visual check for damage
  63
• 4.37 Track rod ends: Check play, security and boots
  63
• 4.38 Swivel joints: Visual check
  64
• 4.39 Tyres (including spare): Check condition and wear pattern
  64
• 4.40 Tyre tread depth (including spare wheel): Check
  65
• 4.41 Tyre pressures (including spare): Check, correct if necessary
  65
• 4.42 Automatic gearbox: Change ATF
  71
• 4.43 Automatic gearbox: Check ATF level
  71
• 4.44 Changing brake fluid
  72
• 4.45 Brake fluid level (dependent upon lining/pad wear): Check
  73
• 4.46 Checking idling speed, adjust if necessary (diesel engines with engine codes AAZ and 1Y)
  74
• 4.47 Headlight adjustment: Check, adjust if necessary
  74
• 4.48 Performing road test
  77
• 5 Exhaust emissions test
  79
• 5.1 Exhaust emissions test for petrol engines
  79
• 5.2 Exhaust emissions test for diesel engines
  104
• 6 Glossary
  120