Technical data
11 Safety information
11.1 Safety precautions when working on high-voltage vehicles
11.2 Safety measures when working with pyrotechnic components
21.5 Checking airbag securing parts after an accident
51.6 Accident without airbag triggering
61.7 Checking seat belts
61.8 Check belt webbing
61.9 Checking inertia reel (locking mechanism)
61.10 Visually checking belt buckle
71.11 Check operation of belt buckle
71.12 Checking belt relays, and buckle tongues
71.13 Checking securing parts and anchorage points after an accident
72 Repair notes
92.1 Contact corrosion
92.2 Routing and attachment of lines
92.3 Safety notes for reworking CFRP components
9Interior equipment
101 Compartments/covers
101.1 Overview of fitting locations - storage compartments/covers
101.2 Assembly overview - driver side footwell cover
111.3 Assembly overview – front passenger side footwell cover
121.4 Assembly overview - steering column trim
131.5 Removing and installing driver side footwell cover
131.6 Removing and installing front passenger side footwell cover
151.7 Removing and installing steering column trim
162 Centre console
192.1 Assembly overview - centre console
192.2 Removing and installing centre console
19Passenger protection
221 Seat belts
221.1 Overview of fitting locations - seat belts and anchorage points
221.2 Assembly overview – three-point seat belt
231.3 Assembly overview – belt buckle
241.4 Removing and installing front three-point seat belt
241.5 Removing and installing belt buckle
272 Airbag system
302.1 Overview of fitting locations - airbag system
303 Airbag control unit
313.1 Assembly overview - airbag control unit
313.2 Removing and installing airbag control unit J234
314 Emergency exit control unit
344.1 Assembly overview – emergency exit control unit
344.2 Removing and installing emergency exit control unit
344.3 Fault finding for emergency exit control unit
365 Driver's airbag
395.1 Assembly overview - driver side airbag
395.2 Removing and installing driver side airbag igniter N95
39Trim, insulation
421 Door trims
421.1 Assembly overview – door trim panel
421.2 Removing and installing front door trim
431.3 Display unit for digital exterior mirror
472 Dash panel
482.1 Assembly overview - dash panel
482.2 Removing and installing dash panel
482.3 Removing and installing dash panel vents
523 Dash panel central tube
563.1 Assembly overview – central tube for dash panel
563.2 Removing and installing central tube for dash panel
574 Interior trims
604.1 Overview of fitting locations - interior trims
604.2 Assembly overview - sill panel moulding
614.3 Assembly overview - steering column trim
624.4 Assembly overview – right B-pillar trim
634.5 Assembly overview - side trim panel
644.6 Assembly overview – upper C-pillar trim
654.7 Assembly overview – A-pillar trim
664.8 Assembly overview – floor covering
684.9 Removing and installing sill panel moulding
684.10 Removing and installing steering column trim
704.11 Removing and installing right B-pillar trim
714.12 Removing and installing side trim panel
734.13 Removing and installing upper C-pillar trim
744.14 Removing and installing back panel trim
764.15 Removing and installing floor covering
775 Luggage compartment trims
795.1 Overview of fitting locations - luggage compartment trims
795.2 Assembly overview – lower rear lid trim
805.3 Removing and installing rear lid trim
805.4 Removing and installing storage compartment in luggage compartment
826 Roof trims
846.1 Assembly overview - moulded headliner
846.2 Removing and installing moulded headlining
85Seat frames
861 Front seats
861.1 Assembly overview - front seat
861.2 Removing and installing driver seat
871.3 Removing and installing front passenger seat
89