Simos injection and ignition system

Kapitelübersicht

• Self diagnosis
  1
• 1 Self diagnosis
  1
• 1.1 Self diagnosis
  1
• 1.2 Function
  1
• 1.3 Technical data of self diagnosis
  1
• 1.4 Connecting fault reader V.A.G 1551 and selecting engine electronics control unit
  2
• 1.5 Coding Simos control unit
  3
• 1.6 Interrogating and erasing fault memory
  4
• 1.7 Fault table
  5
• 1.8 Final control diagnosis
  12
• 1.9 Read measured value block
  15
• 1.10 Display group overview
  15
• Mixture preparation, Injection
  20
• 1 Simos injection and ignition system
  20
• 1.1 Simos injection and ignition system
  20
• 1.2 Fitting locations overview
  20
• 1.3 Servicing injection part
  23
• 1.4 Dismantling and assembling intake manifold - upper part
  30
• 1.5 Dismantling and assembling intake manifold - lower part
  33
• 1.6 Dismantling and assembling air cleaner
  34
• 1.7 Safety precautions
  35
• 1.8 Rules for cleanliness
  35
• 1.9 Technical data
  36
• 1.10 Idling check
  36
• 1.11 Performing basic setting
  37
• 1.12 Checking Lambda probe and Lambda control
  38
• 1.13 Checking Lambda probe heating
  42
• 1.14 Checking engine operating mode
  44
• 1.15 Checking intake manifold change-over valve
  45
• 1.16 Checking air mass meter
  46
• 1.17 Checking throttle valve control part
  48
• 1.18 Checking coolant temperature sender
  55
• 1.19 Checking intake air temperature sender
  57
• 1.20 Checking engine speed sender
  60
• 1.21 Checking speed signal
  61
• 1.22 Checking control unit voltage supply
  63
• 1.23 Matching engine electronic control unit to electronic immobilizer
  65
• 1.24 Checking air conditioner and air conditioner compressor signals
  66
• 1.25 Checking starter signal
  67
• 1.26 Checking injectors
  67
• 1.27 Checking fuel pressure regulator and holding pressure
  70
• 1.28 Checking intake air system for leaks (unmetered air)
  72
• Ignition system
  73
• 1 Simos injection and ignition system
  73
• 1.1 Simos injection and ignition system
  73
• 1.2 Servicing ignition part
  73
• 1.3 Safety precautions
  77
• 1.4 Test data, spark plugs
  77
• 1.5 Checking position of distributor
  77
• 1.6 Removing and installing distributor
  78
• 1.7 Checking ignition timing control
  82
• 1.8 Checking Hall sender
  82
• 1.9 Checking knock sensor
  83
• 1.10 Checking ignition transformer and output stage
  85