Electrical system

Kapitelübersicht

• Starter, current supply, CCS
  1
• 1 Battery
  1
• 1.1 Battery A - disconnect and connect
  2
• 1.2 Battery A - remove and install
  6
• 1.3 Battery A Console - remove and install
  9
• 1.4 Tightening torques - Battery
  10
• 2 Starter
  11
• 2.1 Starter B - remove and install
  11
• 2.2 Starter B (Manufacturer Valeo) - disassemble and assemble
  12
• 2.3 Starter B (Manufacturer Bosch) - disassemble and assemble
  16
• 2.5 Tightening torques - Starter
  28
• 3 Alternator
  29
• 3.1 Generator (Alternator) C - cable fastening (B+)
  29
• 3.2 Generator (Alternator) C - check Poly-V belt
  30
• 3.3 Generator (Alternator) C for 1.0 and 1.6 liter engines - assembly overview
  30
• 3.4 Generator (Alternator) C - replace the Poly-V belt pulley
  36
• 3.5 Voltage regulator C1 (Manufacturer Bosch) - disassemble and assemble
  38
• 3.6 Voltage regulator C1 (Manufacturer Valeo) - disassemble and assemble
  39
• 3.7 Tightening torques - Alternator
  41
• Gauges, instruments
  42
• 1 Combined instrument
  42
• 1.1 Locating defects and indicating faults
  42
• 1.2 Combined instrument K - replace
  43
• 1.3 Combined instrument K - remove and install
  44
• 1.4 Combined instrument K - description of rear part
  46
• 1.5 Combined instrument K - pin assignment
  47
• 1.6 Combined instrument K - control light symbols
  48
• 2 Service interval indication
  50
• 2.1 Service interval indication - reset to zero
  50
• 3 12 Volt socket
  51
• 3.1 12 volt socket U5 - assembly overview
  51
• 3.2 12 volt socket U5 - remove and install
  51
• 3.3 Electric socket 2 - 12V U18 (Fox/Crossfox) - assembly overview
  54
• 3.4 Electric socket 2 - 12V U18 (Fox/Crossfox) - remove and install
  54
• 3.5 Electric socket 2 - 12V U18 - replace
  55
• 3.6 Electric socket 2 - 12V U18 (Spacefox/Suran - version 1) - assembly overview . . .
  57
• 3.7 Electric socket 2 - 12V U18 (Spacefox/Suran - version 1) - remove and install
  57
• 3.8 Electric socket 2 - 12V U18 (Spacefox/Suran - version 2) - assembly overview . . .
  60
• 3.9 Electric socket 2 - 12V U18 (Spacefox/Suran - version 2) - remove and install
  60
• 3.10 Electric socket 2 - 12V U18 - replace
  61
• Windscreen wash/wipe system
  63
• 1 Windscreen wiper system
  63
• 1.1 Windscreen wiper system - assembly overview
  65
• 1.2 Windscreen wiper blade (version 1) - remove and install
  65
• 1.3 Windscreen wiper blade (version 2) - remove and install
  66
• 1.4 Windscreen wiper blade and arm set - remove and install
  66
• 1.5 Windscreen wiper mechanism - remove and install
  69
• 1.6 Windscreen wiper motor V - disassemble and assemble
  69
• 1.7 Windscreen wiper blade resting position - adjust
  71
• 1.8 Blade application angle on windscreen - adjust
  71
• 1.9 Rain and light sensor G397 - remove and install
  72
• 2 Windscreen washer system
  75
• 2.1 Windscreen washer system - assembly overview
  75
• 2.2 Reservoir for the windscreen and rear window washer system - remove and install
  76
• 2.3 Windscreen washer pump V5 and/or Rear window washer pump V13 - remove and install
  77
• 2.4 Windscreen washer system spray nozzles - replace
  78
• 2.5 Windscreen washer system spray nozzles - adjust
  78
• 3 Rear window wiper system
  80
• 3.1 Rear window wiper and washer system - assembly overview
  80
• 3.2 Rear window wiper arm - remove and install
  81
• 3.3 Rear window wiper motor V12 - remove and install
  82
• 3.4 Rear window wiper blade resting position - adjust
  83
• 3.5 Rear window wiper blade - remove and install
  83
• 4 Rear window washer system
  85
• 4.1 Rear window washer system - assembly overview
  85
• 4.2 Rear window washer system spray nozzle - replace
  86
• 4.3 Rear window washer system spray nozzle - adjust
  87
• Lights, bulbs, switches - exterior
  88
• 1 Main headlights
  88
• 1.1 Main headlights - assembly overview
  88
• 1.2 Main Headlights - remove and install
  90
• 1.3 Main headlight lamps (single) - replace
  90
• 1.4 Main headlight lamps (twin) - replace
  92
• 2 Fog lights
  95
• 2.1 Fog lights - assembly overview
  95
• 2.2 Fog lights - remove and install
  96
• 2.3 Auxiliary headlights (CrossFox / Space Cross / Suran Cross) - assembly overview
  97
• 2.4 Auxiliary headlights (CrossFox / Space Cross / Suran Cross) - remove and install
  98
• 3 Headlights - check adjustment
  101
• 3.1 Check headlight adjustment (with the new inspection display without 15º adjustment line).
  102
• 3.2 Headlights - adjust
  103
• 4 Side indicator lights
  106
• 4.1 Side indicator lights incorporated to external rear-view mirrors
  106
• 5 Tail lights
  107
• 5.1 Tail lights (Fox/Crossfox) - assembly overview
  107
• 5.2 Tail light (Fox/Crossfox) - remove and install
  108
• 5.3 Tail light lamp support (Fox/Crossfox) - disassemble and assemble
  109
• 5.4 Tail lights (Spacefox/Suran) - assembly overview
  109
• 5.5 Tail light (Spacefox/Suran) - remove and install
  110
• 5.6 Tail light lamp support (Spacefox/Suran) - disassemble and assemble
  112
• 5.7 Centre tail light “rear lid” (Spacefox/Suran) - remove and install
  112
• 5.8 Left rear fog light lamp L46 (Spacefox/Suran) - replace
  113
• 6 Fog lights
  114
• 6.1 Tail fog light (Fox/Crossfox) - remove and install
  114
• 6.2 Tail fog light lamp L20 (Fox/Crossfox) - replace
  114
• 7 License plate light
  116
• 7.1 License plate light (Fox) - remove and install
  116
• 7.2 Number plate light X (Fox) - replace bulb
  117
• 7.3 License plate light (CrossFox) - remove and install
  117
• 7.4 License plate light X (Crossfox) - replace lamp
  117
• 7.5 Number plate light (Spacefox/Suran) - remove and install
  118
• 7.6 License plate light X (Spacefox/Suran) - replace lamp
  118
• 8 Additional brake light
  119
• 8.1 Auxiliary brake light - remove and install
  119
• 9 Switch set
  121
• 9.1 Direction and wiper switches / glasses washer (version 1) - remove and install . . .
  121
• 9.2 Direction and wiper switches / glasses washer (version 2) - remove and install . . .
  122
• 10 Steering lock set
  124
• 10.1 Steering lock set - remove and install
  124
• 11 Ignition/starter switch and key cylinder
  126
• 11.1 Key cylinder - remove and install
  126
• 11.2 Ignition/starter switch D - remove and install
  128
• 11.3 Ignition switch D - pinout
  128
• 12 Auxiliary parking system
  129
• 12.1 Locating defects and indicating faults
  129
• 12.2 Auxiliary parking system - assembly general view
  130
• 12.3 Control unit for parking aid J446 - remove and install
  131
• 12.4 Warning buzzer for rear parking aid H15 - remove and install
  132
• 12.5 Parking aid sensor - remove and install
  133
• Lights, bulbs, switches - interior
  137
• 1 Internal lights and switches
  137
• 1.1 Cabin surveillance deactivation switch E267 - remove and install
  137
• 1.2 Dashboard switches - remove and install (version 1)
  138
• 1.3 Dashboard switches (vehicles without radio) - remove and install (version 2)
  139
• 1.4 Dashboard switches (vehicles with radio) - remove and install (version 3)
  139
• 1.5 Light switch E1 - remove and install
  140
• 1.6 Glove compartment light W6
  141
• 2 Front door lights and switches
  142
• 2.1 Door contact switches - remove and install
  142
• 2.4 Driver side interior locking switch E150 - remove and install
  145
• 3 Lights and switches in luggage compartment
  146
• 3.1 Luggage compartment lighting switch F5 - remove and install
  146
• 3.2 Boot light W3
  147
• 4 Roof lining lights and switches
  149
• 4.1 Internal front light W1
  149
• 4.2 Internal front light W1 with reading light
  151
• 4.3 Internal front light W1 with sun roof
  154
• 4.4 Make-up mirror lighting - remove and install
  156
• 4.5 Rear reading light W11 and/or W12 - remove e install
  157
• 5 Horns
  159
• 5.1 Treble tone horn H2 - assembly overview
  159
• 5.2 Horn plate H
  161
• 6 Immobilizer
  162
• 6.1 Immobilizer control unit J362 - replace
  162
• 6.2 Immobilizer reading coil D2 - remove and install
  162
• 6.3 Ignition key - variable code transponder
  162
• 6.4 Ignition key - adapt to immobilizer
  162
• 6.5 Ignition key - replace battery
  162
• 7 Alarm System
  163
• 7.1 Locating defects and indicating faults
  163
• 7.2 Anti-theft alarm system - activate and deactivate
  163
• 7.3 Ultra-sound sensor for alarm system G209 - remove and install
  164
• 7.4 Alarm system horn H8 - assembly overview
  165
• Wiring
  168
• 1 Fuse and relay support
  168
• 1.1 Fuse and relay support - remove and install
  168
• 2 Coupling stations and engine compartment bellows lid
  169
• 2.1 Coupling station on A-pillar - assembly overview
  169
• 2.2 Coupling station on B-pillar - assembly overview
  170
• 2.3 Boot cover on engine compartment partition panel - remove and install
  170
• 3 Fuse box
  171
• 3.1 Fuse box - remove and install
  171
• 4 Control units
  177
• 4.1 Central control unit for the convenience system J393
  177
• 4.2 Control unit of lights with windscreen wiper functions J917 (Coming Home/Leaving Home)
  178
• 4.3 Central control unit for window activation J1015 (ZFH)
  180
• 4.4 Control unit for the on-board system J519 (BFM)
  180
• 4.5 Control unit for the on-board system J519 (BCM)
  183