Automatic gearbox 001 self-diagnosis

Kapitelübersicht

• Self-diagnosis
  1
• 1 Self-diagnosis function
  1
• 1.1 Self-diagnosis function
  1
• 1.2 Data bus
  1
• 1.3 Technical data of self-diagnosis
  4
• 1.4 Self-diagnosis - Guide for automatic gearbox
  4
• 2 Performing self-diagnosis
  5
• 2.1 Performing self-diagnosis
  5
• 2.2 Safety precautions
  5
• 2.3 Locations of diagnosis connections
  6
• 2.4 Connecting vehicle diagnosis, testing and information system VAS 5051
  6
• 2.5 Connecting fault reader V.A.G 1551 and selecting functions
  7
• 2.6 Automatic test sequence
  7
• 2.7 List of selectable functions
  9
• 2.8 Interrogating fault memory
  9
• 3 Fault table
  10
• 3.1 Fault table
  10
• 4 Erasing fault memory
  15
• 4.1 Erasing fault memory
  15
• 5 Initiating basic setting
  16
• 5.1 Initiating basic setting
  16
• 6 Read measured value block
  17
• 6.1 Read measured value block
  17
• 6.2 Test table
  18
• 7 End output
  24
• 7.1 End output
  24
• 8 Checking solenoid valves whilst driving
  25
• 8.1 Checking solenoid valves whilst driving
  25
• 8.2 For vehicles up to >09.99
  25
• 8.3 On vehicles from 10.99 >
  26
• 9 Gearbox: Electrical check
  27
• 9.1 Gearbox: Electrical check
  27
• 9.2 Electrical check for vehicles up to > 09.99 (with 45-pin control unit connector)
  29
• 9.3 Test table for vehicles up to > 09.99 (with 45-pin control unit connector)
  30
• 9.4 Electrical check for vehicles from 10.99 >(with 68-pin control unit connector)
  35
• 9.5 Test table for vehicles from 10.99 > (with 68-pin control unit connector)
  37
• 10 Definitions
  42
• 10.1 Definitions
  42